Canvey Island, Essex, England Justin@g0ksc.co.uk
Read Time: 4 - 8 minutes
A 7 element OWA Yagi for 21MHz with a 16.3mtr boom

Premium commercial versions of this antenna at Innovantennas

I WILL MODEL THIS ANTENNA IN ANY TUBE SIZE OR TAPER SECHDULE FOR YOU, CONTACT ME VIA EMAIL

This is a high-gain, wideband OWA (Optimised Wideband Array) Yagi which covers the whole of the 15m band with an SWR of less than1.1:1. It has options with both UK/USA and European sized tube and has a 3 section taper.

This Antenna has been modelled using NEC4 and confirmed by FEKO. This is thousands of dollar of the very latest antenna design software available and the results are highly accurate. When loading into your software, you will see similar SWR but not the same. Please do not alter the model, build to these dimensions for the best results.

Contact me if you are unsure what correction (if any) you require for the element holders/stand-offs you will use or any other questions you may have.

Antenna Layout and Construction:

Performance

11.89dBi @ 21.200MHz

23.86dB @ 21.20MHz

SWR: Below 1.1.1 from 21MHz to 21.450MHz

Construction details

Refer to the above drawings

Antenna Dimensions for UK/USA sized tubing - European version below

Taper: Mid Section, 5/8 inch tube (total length 4.8m). Outer section 1/2 inch 2.4m long. End sections as per below schedule

                          Spacing                  End Section Length   (All below sizes in Metres)               

Reflector                0                              1.201                                          

DE1                      2.064                        1.133                                           

D1                        2.798                           .964                                           

D2                        4.881                           .948                                           

D3                        8.150                           .879                                           

D4                        12.452                        .820                                           

D5                        16.835                        .666                                           

Antenna Dimensions for European sized tubing

Taper: Mid Section, 16mm tube (total length 4.8m). Outer section 13mm tube 2.4m long. End sections as per below schedule

                         Spacing                      End Section Length  (All below sizes in Metres)          

Reflector                0                              1.199                                            

DE1                      2.064                         1.130                                             

D1                        2.798                          .962                                             

D2                        4.881                         .946                                             

D3                        8.150                         .877                                             

D4                      12.452                         .818                                             

D5                      16.835                         .664                                            

Polar Plots

Azimuth Plot of this super antenna

Elevation plot of this antenna

Elevation plot of this antenna at 15M above ground

SWR Plot

Any questions, please ask!

Justin G0KSC