Canvey Island, Essex, England Justin@g0ksc.co.uk
VM - Featured products
144MHz LFA Yagis

Low Noise LFA Yagis designed by G0KSC free to build for personal use.

G0KSC Twin-Boom Quads
Custom low-noise dish feeds
Custom low-noise dish feeds
G0KSC Custom Dish Feeds

Above installation @ HB9Q

previous arrowprevious arrow
next arrownext arrow
Slider
G0KSC SC0606L 6el 50Mhz Yagi Antenna with a 6.75 Metre Length Boom

This antenna is not recommended for use in noisy city locations due to the elevation pattern. This is not a fault with this antenna, it is a characteristic of this boom length/ Wavelength

This antenna has been redesigned and represents what I beleive to the the 'ideal boom length' for an OWA direct feed 50Ohm Yagi. This can be seen in the model in the super flat SWR, the high levels of F/B ratio along with the excellent gain and pattern.

The model below is designed with 12.7mm / 1/2 inch elements and a 12mm element version. If you require a version of this antenna with another diameter wire, Email me and I will remodel. It is NOT POSSIBLE to simply resize the elements when using a different diameter wire and get the best performance in my opinion, I remodel the whole antenna each time. Element positions also need to change for the ideal antenna to be achieved again. Please read all the way down this page, there are other versions of this antenna using tapered elements too. As I have more requests, I will remodel in other element diameters and tapers and pulbish those too.

Fabio IZ3GFZ built the SC0606L for 50MHz

Dimensions in Metres - all tubing 1/2 inch or 13mm diameter, mail for other sizes and tapered elements

Element spacing:

  • Ref =      0
  • Driven =  .690
  • D1 =       1.084
  • D2 =       2.535
  • D3 =      4.525
  • D4 =      6.150

Element sizes per element half:

  • Ref =       1.484
  • Driven =   1.4625
  • D1 =        1.380
  • D2 =        1.3445
  • D3 =        1.3295
  • D4 =        1.3115

Performance figures @ 50.150Mhz:

  • Froward Gain: 11.71dBi free space
  • Front to Back: 21.70dB
  • 1:1.1 SWR B/W 500Khz

Dimensions in Metres - all tubing 12mm

Element spacing:

  • Ref =      0
  • Driven =  .690
  • D1 =       1.084
  • D2 =       2.535
  • D3 =      4.525
  • D4 =      6.150

Element sizes per element half:

  • Ref =       1.485
  • Driven =   1.4635
  • D1 =        1.381
  • D2 =        1.3455
  • D3 =        1.3305
  • D4 =        1.3125

Performance figures @ 50.150Mhz:

  • Froward Gain: 11.69dBi free space
  • Front to Back: 21.44dB
  • 1:1.1 SWR B/W 500Khz

Azimuth Plot


Elevation Plot


This fantastic antenna at 15m up

An Excellent SWR to go with the fantastic pattern!

Remeber, mail me if you have different diameter tube requirements and send photos of built antenna!

Banner